Copper Paris Sky Tower

Steps

1. 1Place 43 stone on the left side of layer 1This starts the ground under the tower. Fill a 4 by 17 strip right on top of the grass.
2. 2Add 43 more stone next to the first stripStay on the left side and keep the strip 4 by 17. Push it up tight so there are no holes.
3. 3Lay 43 stone in a 3 by 17 strip in the middleKeep going across the ground. Line it up with the strips you already placed.
4. 4Fill 43 stone in a 4 by 17 strip in the middleThis fills more of the middle of the ground. Count as you go so the rows stay even.
5. 5Place 43 stone in a 4 by 17 strip on the rightNow you are on the right side. Keep the edges straight with the other strips.
6. 6Finish the right side with 38 stoneFill the last strip inside a 3 by 17 area. Now the stone ground should be done.
7. 7Add 36 stone bricks on the left sideThese go inside a 10 by 19 area on layer 1. They make a nice trim around the stone.
8. 8Add 36 stone bricks on the right sideMatch the left side inside a 10 by 19 area. Both sides should look the same.
9. 9Place 36 stone bricks in the middlePut them inside a 15 by 15 area. These mark the spots where the big tower legs will stand.
10. 10Build 36 waxed exposed copper on layer 2These are the bottoms of the legs inside a 15 by 15 area. Put the 1 ladder on a leg so you can climb up.
11. 11Stack 36 waxed exposed copper grate on layers 3 to 5The legs lean in, so keep them inside a 13 by 13 area. Add the 3 ladders in a column to keep your climb going.
12. 12Add 36 more waxed exposed copper grate up to layer 6Build from layer 3 to layer 6 inside a 12 by 12 area. Add 1 ladder on top of the others.
13. 13Place 24 waxed exposed cut copper slabs on layer 6Put 16 slabs in the top half of the block. They start the first deck inside an 11 by 11 area.
14. 14Make a 9 by 9 outline of waxed exposed copper grateUse 32 blocks on layer 7 to make a ring. Add 1 ladder so you can reach the deck.
15. 15Place 28 waxed exposed chiseled copper and 12 slabsPut the chiseled copper inside a 5 by 9 area on layers 7 and 8. The 12 waxed exposed cut copper slabs go in an 11 by 11 area.
16. 16Fill 28 more waxed exposed chiseled copper on layer 8Use a 5 by 9 area again. This makes the floor of the little room.
17. 17Place 24 waxed exposed copper grate on layer 8Keep them inside a 5 by 5 area. Add 1 ladder so you can climb into the room.
18. 18Build 44 waxed exposed copper grate on layers 9 to 13These are the walls of your tiny home, inside a 7 by 7 area. Leave spaces for windows.
19. 19Fill a 5 by 5 square with 25 waxed exposed copper grateThis goes on layer 14. It is the ceiling of the room and the floor for the next part.
20. 20Put 16 stairs around 9 waxed exposed chiseled copperThe waxed exposed cut copper stairs make a 5 by 5 outline on layer 15. Flip all 16 upside down and fill the 3 by 3 middle.
21. 21Stack a 3 by 3 of waxed exposed copper grate 5 highUse 45 blocks from layer 16 to layer 20. This is the thin middle of the tower.
22. 22Build 30 waxed exposed copper grate from layer 21 to 30The tower gets very thin here, inside a 3 by 3 area. Leave room on the sides for iron bars later.
23. 23Add 8 stairs, 7 grate, and 1 chiseled copper on topMake a 3 by 3 outline of 8 upside down waxed exposed cut copper stairs. Add the waxed exposed copper grate and 1 waxed exposed chiseled copper.
24. 24Place 20 iron bars on layer 3Put them inside a 15 by 15 area between the leg parts. They give the tower its metal look.
25. 25Add 20 iron bars on layer 4Keep them inside a 13 by 13 area. Fill the open spots in the legs.
26. 26Add 20 more iron bars on layer 5Stay inside a 13 by 13 area. Line them up with the bars below.
27. 27Make an 11 by 11 ring of 28 iron barsThis goes on layer 7 like a fence around the deck. Leave 12 gaps in the ring.
28. 28Place 12 iron bars on layer 11Put them inside a 7 by 7 area. These are windows for the little room.
29. 29Add 32 iron bars on layer 12Keep them inside a 7 by 7 area. They fill in more of the room walls.
30. 30Add 28 iron bars on layer 13Stay inside a 7 by 7 area. This finishes the walls of the room.
31. 31Make a 5 by 5 outline of 16 iron bars on layer 16Wrap them around the thin middle of the tower.
32. 32Make another 5 by 5 outline of 16 iron barsThis one goes on layer 17, right on top of the last ring.
33. 33Make a 5 by 5 outline of 12 iron bars on layer 18Leave 4 gaps in the ring. Check that it lines up with the ring below.
34. 34Add another 5 by 5 outline of 12 iron barsPut this one on layer 19. Leave 4 gaps in the same spots as before.
35. 35Build 4 columns of iron bars, each 3 blocks tallUse 12 iron bars from layer 22 to layer 24. They go around the thin top part.
36. 36Ring 8 iron bars around the top on layer 25Make the outline of a 3 by 3 square around the copper in the middle.
37. 37Add a 3 by 3 ring of 8 iron bars on layer 26Stack it right on top of the last ring.
38. 38Place 8 more iron bars in a ring on layer 27Keep making the outline of a 3 by 3 square.
39. 39Add a ring of 8 iron bars on layer 28Your rings should look like a tall metal tube now.
40. 40Put a 3 by 3 ring of 8 iron bars on layer 29Line it up with the rings below. You are almost to the top.
41. 41Finish with 8 iron bars in a ring on layer 30This is the last 3 by 3 ring of bars.
42. 42Stack 9 waxed exposed copper grate for the tipBuild from layer 32 to layer 35 inside a 3 by 3 area. This is the pointy top of the tower.
43. 43Put the brown bed, anvil, cauldron, and stonecutter insideThese go on layer 9 in the little room. The bed takes 2 blocks, so leave room for it.
44. 44Add an ender chest, chest, furnace, and blast furnacePlace them on layer 9 inside the room. This is where you keep your stuff and cook.
45. 45Place 6 waxed exposed copper trapdoors in a tall columnStack them inside from layer 2 to layer 7. Keep them in one line 6 blocks tall.
46. 46Add 8 waxed exposed copper trapdoors on layer 11Put them inside the room in a 5 by 5 area. They add nice detail to the walls.
47. 47Hang 4 lanterns inside on layer 6Spread them inside a 9 by 9 area so the deck is bright.
48. 48Hang 4 lanterns inside the room on layer 13Put them inside a 5 by 5 area. They light up your tiny home.
49. 49Set out a brewing stand, barrel, smoker, and crafting tablePut them on the deck on layers 9 and 10. This makes a handy work spot outside the room.
50. 50Put 8 waxed exposed copper trapdoors on layer 4Place them on the outside inside a 15 by 15 area. They make trim on the legs.
51. 51Add 8 waxed exposed copper trapdoors on layer 6Keep them inside a 13 by 13 area. Match them to the trim below.
52. 52Make a 9 by 9 ring of 32 waxed exposed copper trapdoorsThis goes on layer 10 like a railing for the deck. Add the potted dead bush as a little plant.
53. 53Make a 7 by 7 ring of 20 waxed exposed copper trapdoorsPut it on layer 16 and leave 4 gaps in the ring.
54. 54Add 4 columns of waxed exposed copper trapdoors, 2 highUse 8 trapdoors on layers 20 and 21 around the thin part of the tower.
55. 55Make a 5 by 5 ring of 12 waxed exposed copper trapdoorsThis goes on layer 32 near the top. Leave 4 gaps in the ring.
56. 56Hang 8 lanterns around the outside on layer 6Spread them inside a 13 by 13 area so the tower glows at night.
57. 57Place 16 iron chains on layer 9Put them inside a 9 by 9 area around the deck. They add a cool metal look.
58. 58Put 4 lanterns on the corners of a 7 by 7 areaThese go on layer 13, one at each corner.
59. 59Put 4 lanterns on the corners of a 5 by 5 areaThese go on layer 18. Count to make sure each corner gets one.
60. 60Add 4 lanterns and 4 iron chains at the top cornersPlace them on the 4 corners of a 3 by 3 area on layers 33 and 34.
61. 61Stack 6 iron chains to make the antennaBuild from layer 34 to layer 37 inside a 3 by 3 area. This is the very top of your tower.

• 288×Waxed Exposed Copper Grate
• 276×Iron Bars
• 253×Stone
• 108×Stone Bricks
• 102×Waxed Exposed Copper Trapdoor
• 66×Waxed Exposed Chiseled Copper
• 36×Waxed Exposed Copper
• 36×Waxed Exposed Cut Copper Slab
• 28×Lantern
• 26×Iron Chain
• 24×Waxed Exposed Cut Copper Stairs
• 7×Ladder
• 1×Anvil
• 1×Barrel
• 1×Blast Furnace
• 1×Brewing Stand
• 1×Brown Bed
• 1×Cauldron
• 1×Chest
• 1×Crafting Table
• 1×Dead Bush
• 1×Ender Chest
• 1×Flower Pot
• 1×Furnace
• 1×Smoker
• 1×Stonecutter