Giant Oak Tree Hideout

Steps

1. 1Dig 1 down and lay 21 oak planks and 16 oak logThis is the base of the big trunk. Keep the planks inside a 5 by 5 area and the logs inside a 7 by 7 area.
2. 2Place 45 oak log in a 9 by 9 area for the trunkPut 4 spruce fence on the corners of a 7 by 9 area. Add 2 oak stairs in a row.
3. 3Stack 87 oak log on layers 2 and 3 of the trunkAdd 8 oak stairs in a 4 by 2 area. Flip 4 of the stairs upside down.
4. 4Add 4 spruce stairs, 4 spruce slab and 1 oak planksStack the stairs from layer 1 to layer 3, with 2 upside down. Put the slabs on the 4 corners of a 7 by 7 area.
5. 5Build the trunk up with 92 oak log on layers 4 to 7Keep it inside a 9 by 9 area. Add 2 oak planks and 2 spruce fence where they go.
6. 6Add 17 spruce stairs, 16 oak stairs and 12 spruce slabThese make the trunk bumpy like real bark. Flip 9 of the stairs upside down.
7. 7Grow the trunk with 78 oak log on layers 8 to 11The trunk gets wider here. Add 7 spruce stairs and 2 oak planks, with 5 stairs upside down.
8. 8Place 16 oak stairs and 2 spruce fence on layers 8 to 11Flip 8 of the stairs upside down. They help the trunk curve out to hold the cabins.
9. 9Make a filled 3 by 3 square of spruce planksThis is on layer 11, left side. Put 12 spruce slab around it in a 5 by 5 outline with 4 gaps. Slabs go in the top half.
10. 10Lay 69 spruce planks on layer 12 for a floorKeep it inside a 9 by 9 area. Add 2 spruce stairs in a line, with 1 upside down.
11. 11Add 40 spruce slab around the left deckPut every slab in the top half of the block. They spread out in an 11 by 11 area.
12. 12Place 19 oak log, 6 oak planks and 4 oak stairsThe planks make a 2 by 4 outline with 2 gaps. Flip 2 of the stairs upside down.
13. 13Stack 30 oak log on layers 13 and 14Add 8 oak stairs and 4 spruce stairs around them. Flip 5 of the stairs upside down.
14. 14Put up 23 oak fence around the left deckThis is the railing so you do not fall off. Add 1 smooth quartz stairs where it goes.
15. 15Build the left cabin walls with 20 oak planksAdd 8 stripped spruce log as 4 posts, each 2 blocks tall. Add 10 spruce fence too.
16. 16Add 16 stripped oak log and 12 oak fence gatePut these on layers 13 and 14 on the left side. The fence gates help finish the railing.
17. 17Make a filled 3 by 3 square of spruce planksThis is on layer 14, right side. Put 12 spruce slab around it in a 5 by 5 outline with 4 gaps. Slabs go in the top half.
18. 18Lay 69 spruce planks for the right cabin floorThis is on layer 15. Keep it inside a 9 by 9 area.
19. 19Place 16 oak planks and 4 stripped spruce logPut the logs on the 4 corners of a 7 by 7 area. Add 4 oak stairs, all upside down.
20. 20Add 13 oak log and 12 spruce slab on the rightPlace the slabs in the top half of the block around the right floor.
21. 21Build walls with 47 oak planks on layers 16 to 18Add 12 spruce stairs upside down and 8 spruce fence. Leave gaps for windows and doors.
22. 22Add 40 stripped spruce log for the wall postsAlso place 4 oak stairs upside down and 1 smooth quartz stairs on layers 16 to 18.
23. 23Stack 30 oak log 3 layers high on the rightPlace 10 logs on each layer. Add 16 stripped oak log in a 7 by 7 area.
24. 24Grow the trunk with 72 oak log on layers 19 to 24Stay inside a 5 by 19 area. The trunk keeps going up past the cabins.
25. 25Place 32 stripped spruce log on layers 19 to 22These keep building the cabin walls up higher.
26. 26Add 26 spruce stairs on layers 19 to 24Flip 23 of them upside down. They spread out wide to start the branches.
27. 27Place 12 oak planks on the right sidePut them on layers 20 and 21 inside a 5 by 7 area.
28. 28Stack 61 oak log on the front for a big branchGo from layer 25 to layer 36. Stay inside a 5 by 10 area.
29. 29Stack 71 oak log in the middle on layers 25 to 36This is the trunk reaching high to hold up the leaves.
30. 30Add 16 spruce stairs and 2 spruce planksPlace them on layers 25 to 32. Flip 13 of the stairs upside down.
31. 31Top the trunk with 50 oak log, 5 layers highPlace 10 logs on each layer from layer 37 to layer 41.
32. 32Add 6 glass panes, 2 oak doors and 1 spruce doorPut the glass panes in the window gaps. Each door takes 2 blocks, so the gap must be 2 tall.
33. 33Ring the right deck with 28 spruce slabMake an 11 by 11 outline with 12 gaps. Put every slab in the top half.
34. 34Put up 23 oak fence around the right deckAdd 4 oak stairs in a 2 by 2 square, with 2 upside down. Add 2 oak log too.
35. 35Place 20 spruce stairs and 12 oak fence gateThis is layer 16. The stairs start the bottom edge of the roof.
36. 36Build the roofs with 84 oak stairsGo up from layer 17 to layer 22. Each layer steps in to make a slanted roof. Add 6 spruce fence.
37. 37Add 42 spruce stairs to the roof edgesPlace them on layers 17 to 22 to trim the roofs with a darker wood.
38. 38Top the roofs with 18 spruce slabLay them along the top of the roofs from layer 20 to layer 23.
39. 39Place 3 oak log and 2 spruce fence on layer 25These go in the middle, near the trunk.
40. 40Add 37 oak log for long branchesThey go from layer 26 to layer 42. Branches stick out to hold the leaves.
41. 41Place 10 spruce stairs on layers 26 to 33Put them along the branches to make them look thicker.
42. 42Put the red bed in the left cabinIt goes on layer 13. A bed takes 2 blocks, so leave room.
43. 43Put the blue bed in the right cabinIt goes on layer 16. A bed takes 2 blocks, so leave room.
44. 44Add 3 crafting tables, a blast furnace and a stonecutterThese go in the left cabin on layer 13. This is your work corner.
45. 45Add a smoker, cartography table, furnace and smithing tablePut them next to the other work blocks in the left cabin.
46. 46Add 3 crafting tables, a blast furnace and a stonecutterThese go in the right cabin on layer 16. Now both cabins can craft.
47. 47Add a smoker, cartography table, furnace and smithing tablePut them next to the other work blocks in the right cabin.
48. 48Place 8 barrels, 3 chests and 1 ender chestThese go in the left cabin on layer 13. They hold all your stuff.
49. 49Stack 14 barrels and add 3 chests on the leftPut them on layers 14 and 15. Keep the barrels inside a 5 by 5 area.
50. 50Place 11 chests on layer 16These go in the middle, inside the cabins.
51. 51Place 12 barrels, 3 chests and 1 ender chestThese go in the right cabin on layers 16 and 17.
52. 52Add 10 barrels on layer 18 in the right cabinKeep them inside a 5 by 5 area.
53. 53Put 8 chests on layer 19 in the right cabinKeep them inside a 5 by 5 area for more storage.
54. 54Place 4 spruce trapdoor inside the trunkThey go on a flat wall from layer 1 to layer 3.
55. 55Add 35 spruce trapdoor on layer 12These go inside on the left side to dress up the room.
56. 56Make a ring rug with 7 red carpetLay them in a 3 by 3 outline with 1 gap. Add a potted blue orchid, oak sapling and oxeye daisy.
57. 57Add 35 spruce trapdoor and some potted flowersThe flowers are a red tulip, a lily of the valley and a poppy. Put them on layers 14 and 15.
58. 58Make a ring rug with 7 blue carpetLay them in a 3 by 3 outline with 1 gap. Add 2 potted cornflower, a flowering azalea and a fern.
59. 59Add a potted lily of the valley and potted azure bluetPut them in the right cabin on layer 17.
60. 60Hang 5 lanterns and 1 iron chain in the trunkThey go from layer 3 to layer 8. Lanterns keep the inside bright.
61. 61Hang 6 lanterns on 7 iron chainThese go on layers 9 and 10 on the left side. Hang the lantern under the chain.
62. 62Hang 4 lanterns with 6 iron chain on layer 11Put the chains up top and the lanterns under them.
63. 63Hang 6 lanterns with 6 iron chain on the rightThese go on layers 12 and 13 to light the right side.
64. 64Place 10 lanterns on layer 14 in the left cabinKeep them inside a 9 by 9 area so the room is bright.
65. 65Hang 2 lanterns with 7 iron chain in the middleThese go from layer 14 to layer 16.
66. 66Place 14 lanterns in the right cabinSpread them out from layer 17 to layer 20.
67. 67Dig 1 down and place 3 dirt in a rowThis goes in the middle, under the grass.
68. 68Add 2 spruce stairs on layer 15 on the rightFlip both of them upside down.
69. 69Build a big branch with 96 oak logIt goes from layer 16 up to layer 38. Add 1 spruce fence and 1 spruce planks.
70. 70Stack 12 oak log in 3 columns on the rightEach column is 4 blocks tall, from layer 39 to layer 42.
71. 71Add 18 spruce stairs on layers 20 to 33Flip 10 of them upside down. They give the branch a rough shape.
72. 72Stack 12 oak log in 3 columns on the leftEach column is 4 blocks tall. Add 2 spruce stairs upside down and 1 spruce fence.
73. 73Build more branches with 87 oak logThey go from layer 23 to layer 42 all around. Add 1 spruce planks.
74. 74Add 18 spruce stairs on layers 23 to 33Flip 10 of them upside down to shape the branches.
75. 75Place 64 oak leaves on layers 23 to 25 on the leftKeep them inside an 11 by 11 area. This is a small leaf clump over the left cabin.
76. 76Place 44 oak leaves on layers 24 and 25Put them in the middle near the tips of the branches.
77. 77Spread 88 oak leaves all around on layer 26This is the wide bottom of the leaf top. Cover the ends of the branches.
78. 78Add 76 oak leaves on layer 27 in the middleKeep them inside a 20 by 32 area.
79. 79Add 28 oak leaves on layer 27 on the rightThis makes a small clump over the right cabin.
80. 80Spread 97 oak leaves all around on layer 28Keep them inside a 30 by 30 area. The tree top keeps growing.
81. 81Place 96 oak leaves on layers 29 and 30Keep them inside a 21 by 28 area.
82. 82Place 62 more oak leaves on layers 29 and 30Keep them inside a 26 by 22 area to fill the gaps.
83. 83Add 84 oak leaves on layer 31Keep them inside a 26 by 25 area.
84. 84Add 68 oak leaves on layer 32Keep them inside a 25 by 25 area.
85. 85Add 68 oak leaves on layer 33Keep them inside a 25 by 25 area, just like the layer below.
86. 86Add 68 oak leaves on layer 34Keep them inside a 25 by 25 area.
87. 87Add 64 oak leaves on layer 35Now the top gets smaller. Keep them inside a 23 by 23 area.
88. 88Add 64 oak leaves on layer 36Keep them inside a 23 by 23 area.
89. 89Add 60 oak leaves on layer 37Keep them inside a 21 by 21 area.
90. 90Add 56 oak leaves on layer 38Keep them inside a 21 by 21 area.
91. 91Add 52 oak leaves on layer 39Keep them inside a 19 by 19 area.
92. 92Add 64 oak leaves on layer 40Keep them inside a 17 by 17 area. The top is getting round.
93. 93Add 68 oak leaves on layer 41Keep them inside a 15 by 15 area.
94. 94Add 72 oak leaves on layer 42Keep them inside an 11 by 11 area.
95. 95Cap the tree with 37 oak leaves on layer 43Keep them inside a 7 by 7 area. This is the very top of the tree.
96. 96Hang 9 glow berries on layers 21 and 22Place them under leaves near the front left corner so they hang down and glow.
97. 97Hang 10 glow berries on layer 23 on the leftPut them on the bottom of leaves so they dangle.
98. 98Hang 15 glow berries all around on layer 24Spread them out so the whole tree glows at night.
99. 99Hang 18 glow berries and add 2 moss blockThese go on layer 25. The moss adds a soft green spot to the branches.
100. 100Hang 15 glow berries and add 3 moss blockThese go on layer 26 in the middle.
101. 101Hang 14 glow berries on layer 27Put them under leaves in the middle of the tree.
102. 102Hang 11 glow berries and add 5 moss blockThese go on layers 27 and 28 in the middle.
103. 103Hang 11 glow berries and add 9 moss blockThese go on layers 28 and 29. Mix the moss in with the leaves.
104. 104Hang 10 glow berries and add 1 moss blockThese go on layer 30 in the middle.
105. 105Hang 12 glow berries on layer 31Keep them inside a 16 by 17 area.
106. 106Hang 13 glow berries on layer 32Keep them inside a 16 by 17 area.
107. 107Hang 15 glow berries on layer 33Keep them inside a 16 by 18 area.
108. 108Hang 16 glow berries on layer 34Keep them inside an 18 by 18 area.
109. 109Hang 17 glow berries on layer 35Keep them inside an 18 by 18 area.
110. 110Hang 16 glow berries and add 1 moss blockThese go on layer 36 in the middle.
111. 111Hang 15 glow berries and add 1 moss blockThese go on layer 37 in the middle.
112. 112Hang 11 glow berries and add 4 moss blockThese go on layer 38 near the top of the tree.
113. 113Hang 9 glow berries and add 2 moss blockThese go on layer 39 in the middle.
114. 114Add 9 moss block and 7 glow berries at the topThese go on layers 40 and 41. Now the berries are done.
115. 115Add 42 spruce trapdoor around the left cabinPut them on the outside from layer 12 to layer 14 to dress up the edges.
116. 116Place 6 spruce trapdoor and 2 oak trapdoorThese go outside on layers 15 and 16 in the middle.
117. 117Add 39 spruce trapdoor around the right cabinPut them on the outside on layers 17 and 18.
118. 118Hang 18 lanterns outside around the treeSpread them from layer 2 up to layer 26 so the path and decks glow at night.

• 1380×Oak Leaves
• 913×Oak Log
• 244×Glow Berries
• 200×Spruce Stairs
• 161×Spruce Trapdoor
• 160×Spruce Planks
• 150×Oak Stairs
• 138×Spruce Slab
• 127×Oak Planks
• 84×Stripped Spruce Log
• 65×Lantern
• 46×Oak Fence
• 44×Barrel
• 37×Moss Block
• 36×Spruce Fence
• 32×Stripped Oak Log
• 28×Chest
• 27×Iron Chain
• 24×Oak Fence Gate
• 12×Flower Pot
• 7×Blue Carpet
• 7×Red Carpet
• 6×Crafting Table
• 6×Glass Pane
• 3×Dirt
• 2×Blast Furnace
• 2×Cartography Table
• 2×Cornflower
• 2×Ender Chest
• 2×Furnace
• 2×Lily of the Valley
• 2×Oak Door
• 2×Oak Trapdoor
• 2×Smithing Table
• 2×Smoker
• 2×Smooth Quartz Stairs
• 2×Stonecutter
• 1×Azure Bluet
• 1×Blue Bed
• 1×Blue Orchid
• 1×Fern
• 1×Flowering Azalea
• 1×Oak Sapling
• 1×Oxeye Daisy
• 1×Poppy
• 1×Red Bed
• 1×Red Tulip
• 1×Spruce Door